- 手機：
- 18631165157
- 電話：
- 18631165157
- 郵箱：
- 415130881@qq.com
- 地址：
- 安國市南陽工業區
4RV-AF泡沫泵的詳細參數
賓漢姆泵是從美國賓漢姆---威廉米特(Bigham -Willamette )公司引進的臥式管道輸油泵,類型為HSB型是單級、雙吸、水平中開、雙蝸殼式離心泵。目前，在石油管道應用的賓漢姆泵主要有兩種類型:一是全級泵,規格為20X20x 19HSB,系列號為4B636~ 4B644;二是半級泵,規格為20X20x 16BHSB,系列號為4B633~4B635。它們的性能特點是:揚程低.排量大、效率高，需要正壓進泵.運行安全平穩易于實現自動化和遠程操作。圖1-95 給出了賓漢姆泵型譜圖。
液化天然氣(LNG)輸送用離心泵簡介
液化天然氣(LNG)技術除了用來解決天然氣儲存、運輸問題外，還廣泛地用于天然氣使用時的調峰裝置上。通常的LNG多存儲在溫度為112K、壓力為0.1MPa左右的低溫儲罐內。輸送LNG這類低溫易燃介質，不僅要求輸送泵能夠承受低溫，對泵的氣密性能和電氣方面安全性能要求更高。
LNG輸送泵按照功能不同，一般分為罐內泵和高壓泵。罐內泵為單級離心泵，工作壓力較低，一般在1. 2MPa左右，為LNG接收站內的保冷循環、槽車裝運和BOG(Boil Off Gas,閃蒸氣)的冷凝提供流量,并為高壓泵提供吸入壓頭,確保高壓泵的正常運轉。典型的罐內泵結構如圖1-96所示。高壓泵為多級離心泵，工作壓力較高，根據不同設計要求一般在4~10MPa之間，為液化天然氣的氣化外輸提供動力，如圖1-97所示。
LNG輸送泵由于輸送介質為超低溫的液化天然氣,因此LNG輸送泵相對于普通泵有自身的一些優點和特色:
(1)LNG輸送泵采用潛液式離心泵,在運行過程中完全隔絕空氣，具有較高的安全性;
Detailed parameters of 4RV-AF foam pump
Bingham pump is a horizontal pipeline oil pump imported from Bigham Willamette company in the United States. It is a single-stage, double suction, horizontal split, double volute centrifugal pump. At present, there are mainly two types of Bingham pumps used in oil pipelines: one is full stage pump, with specifications of 20x20x19hsb, serial number of 4b636 ~ 4b644; the other is half stage pump, specification is 20x20x16bhsb, serial number is 4b633 ~ 4b635. Their performance characteristics are: low head, large displacement, high efficiency, need positive pressure into the pump, safe and stable operation, easy to realize automation and remote operation. Figure 1-95 shows the spectrum of Bingham pump type.
Brief introduction of centrifugal pump for LNG transportation
Liquefied natural gas (LNG) technology is not only used to solve the problems of natural gas storage and transportation, but also widely used in peak shaving devices when natural gas is used. LNG is usually stored in low-temperature storage tank with temperature of 112k and pressure of about 0.1MPa. Transportation of LNG, a low-temperature flammable medium, not only requires the pump to withstand low temperature, but also requires higher air tightness and electrical safety of the pump.
According to different functions, LNG transfer pump is generally divided into tank pump and high-pressure pump. The pump in the tank is a single-stage centrifugal pump with low working pressure, generally about 1.2MPa. It provides flow for cold insulation cycle, tank car transportation and bog (oil off gas) condensation in LNG terminal, and provides suction head for high-pressure pump to ensure normal operation of high-pressure pump. A typical tank pump structure is shown in figure 1-96. The high-pressure pump is a multi-stage centrifugal pump with high working pressure. According to different design requirements, the high-pressure pump is generally between 4-10mpa, providing power for the gasification and export of liquefied natural gas, as shown in Fig. 1-97.
LNG transfer pump has its own advantages and characteristics compared with ordinary pump because its conveying medium is ultra-low temperature liquefied natural gas
(1) The submerged centrifugal pump is used in LNG transfer pump, which is completely isolated from air during operation and has high safety;
上一條 ： 2QV-AF泡沫泵的軸面流動計算
下一條 ： 2QV-AF泡沫泵泡沫浮選機的選擇
